How Often Should You Drain and Refill Your Hot Tub? A Denver Homeowner's Guide
"How often should I change my hot tub water?" is one of the questions we hear most from hot tub owners across Denver, Wheat Ridge, Lakewood, and the mountain towns we serve. Sanitizer and filters keep your water clean day to day, but they can't keep it fresh forever. Eventually the water fills up with dissolved minerals, body oils, lotions, and leftover chemicals. At that point, more chemicals won't fix it. You need fresh water.
This guide covers how often to drain your hot tub, a simple way to work out your own schedule, the signs that you're overdue, and a step-by-step drain and refill process, including what Colorado homeowners need to know about doing it in cold weather.
Why Hot Tub Water Wears Out
Each soak adds sweat, skin cells, deodorant, hair products, and sunscreen to a few hundred gallons of hot water. Each dose of sanitizer, pH adjuster, and shock leaves something behind as well. All of that builds up as total dissolved solids (TDS).
Once TDS gets too high, sanitizer stops working as well. You may see foam, a musty smell, cloudy water, or chemistry that won't stay balanced no matter how much you add. If you've read our guide on why hot tub water gets cloudy, high TDS is often the cause when nothing else fixes the problem.
A common industry guideline is to drain once TDS climbs about 1,500 ppm above your fill water's starting level. To use it, test your tap water when you fill the tub, then test the tub monthly.
The Simple Hot Tub Drain Formula
Most manufacturers recommend changing the water every 3 to 4 months under normal use. To fit that schedule to your household, use this formula:
(Tub gallons ÷ 3) ÷ average daily bathers = days between water changes
For example, a 400-gallon hot tub used by two people every day works out to about 67 days. That means a water change roughly every two months.
If you don't soak every day, convert your usage to a daily average. Two people soaking three times a week is 6 soaks per week. Divide by 7 and you get about 0.86 bathers per day.
Typical Drain Schedules
| Tub Size | Typical Use | Estimated Interval |
|---|---|---|
| 300 gallons | 1 person daily | About 100 days |
| 400 gallons | 2 people, 3 times a week | About 5 months (still test TDS) |
| 400 gallons | 2 people daily | About 67 days |
| 450 gallons | Family of 4, daily | About 38 days |
| 500 gallons | Mountain vacation rental, 6+ guests | About 4 weeks, or after heavy weekends |
Treat the formula as a starting point, not a guarantee. If you use mostly bromine, rarely shower before soaking, or have a lot of guests, change the water sooner.
Signs It's Time to Change Your Water
Drain early, no matter what the calendar says, if you notice:
- Foam that keeps coming back after you use a defoamer
- Cloudy or dull water that won't clear after you clean the filter and shock the tub
- A chemical or musty smell
- Sanitizer that disappears within a day
- pH or alkalinity that keeps drifting no matter how often you adjust it
- Skin or eye irritation even though the water tests balanced
- A slimy ring at the waterline (often a sign of biofilm)
Why Denver Water Matters
Denver Water is generally classified as moderately hard, averaging about 5 grains per gallon (roughly 89 to 105 ppm). It can run harder in the fall and winter. Some neighboring suburbs, such as Thornton, have noticeably harder water, and private wells in the foothills and mountains can be harder still or carry metals like iron and copper.
What that means for your hot tub:
- Hard fill water starts you off with more minerals, so TDS reaches its limit sooner and you may see scale on jets and heaters.
- A hose pre-filter on your garden hose removes sediment and some metals during refill. It's an inexpensive step that's well worth it for mountain homes on wells.
- Test calcium hardness after every refill. A common target for most acrylic hot tubs is about 150 to 250 ppm.
How to Drain and Refill Your Hot Tub, Step by Step
Set aside 3 to 5 hours for the whole job, including the refill and reheating time.
1. Flush the plumbing (the day before or an hour before).
Add a spa line-flush product and run the jets according to the label. It loosens biofilm inside the pipes so it drains out instead of contaminating your new water.
2. Turn off the power at the breaker.
Never run the pumps or heater without water. Running a heater dry can damage it quickly.
3. Drain the tub.
Open the drain spout and attach a garden hose, or use a submersible pump to drain much faster. Make sure the water goes somewhere appropriate (see the next section).
4. Clean or replace the filters.
Soak them in filter cleaner and rinse them thoroughly. If your filter is more than 12 to 18 months old or the pleats are frayed, replace it.
5. Clean the shell.
Wipe the surface with a non-foaming spa surface cleaner and a soft cloth. Don't use household cleaners, which can leave soap residue that causes foam later. Rinse well and remove any leftover water from the footwell.
6. Clean and condition the cover.
Your cover takes a beating from Colorado sun and snow. A cleaner and UV protectant help it last longer and seal better, which also keeps your heating costs down.
7. Refill through the filter well.
Put the hose (with the pre-filter) into the filter compartment. Filling this way pushes air out of the plumbing and helps prevent an "airlock," where the pumps hum but water won't move. Fill to the level line on the manufacturer's label.
8. Restore power and balance the water.
Turn the breaker back on and let the water circulate, then test and adjust in this order: total alkalinity (80 to 120 ppm), pH (7.2 to 7.8), calcium hardness, then sanitizer. Add a metal sequestrant if you're on well water. Put the cover back on and let the tub heat up.
Where Should the Water Go?
Hot tub water contains sanitizer that can harm plants, fish, and streams. Before you drain:
- Stop adding sanitizer a few days ahead and let the chlorine or bromine level fall close to zero. Test before you drain.
- Watering your lawn with low-chemical water is often the simplest option. Drain slowly so the water soaks in instead of running into the street or onto a neighbor's property.
- Storm drains have rules. Denver's standard for draining pool and spa water to the storm sewer requires chlorine below 0.5 mg/L and a discharge temperature of at least 40°F. Saltwater tubs need extra care, so check with your city or HOA before draining.
Rules vary between Denver, Wheat Ridge, Lakewood, and mountain communities, so check your local guidelines if you're unsure.
Draining a Hot Tub in a Colorado Winter
Many Colorado owners change their water in winter, and you can, but plan carefully:
- Pick a mild, sunny day, ideally above 40°F. That's warmer than the minimum, but it gives you room for error.
- Never leave the tub empty overnight in freezing weather. Water left in the pipes, pumps, and heater can freeze and crack them, and that kind of damage is expensive.
- Have everything ready before you start, including filters, chemicals, and the hose, so you can drain, clean, and refill in one session.
- Disconnect and drain your hose when you're done so it doesn't freeze.
- In the mountains (Summit County, Winter Park, Evergreen, and similar areas), it's often safest to schedule your water change for late spring or early fall, or to have a professional handle it.
If your tub will sit unused for the season at a second home, don't drain it partway and hope for the best. Proper winterization means blowing out the lines, and it's best left to a technician.
Make Your Water Last Longer
You can stretch the time between water changes by:
- Asking everyone to rinse off before soaking
- Rinsing your filter every week or two and deep-cleaning it monthly
- Using an enzyme product or a mineral system to break down oils
- Keeping the cover closed and testing your water at least weekly
These habits keep your hot tub safer and more comfortable, and they reduce the chemicals you have to buy.
Let Over the Top Hot Tubs & Spas Handle It
Don't want to spend a Saturday draining your tub, or don't want to risk it in January? Our service team handles water changes, filter cleaning, chemistry balancing, and seasonal care for hot tub owners throughout the Denver metro area and the Colorado mountains.
Call Wheat Ridge at (720) 408-7417, Summit County at (719) 437-8616, or email info@ottspas.com to schedule service.
Frequently Asked Questions
How often should I drain my hot tub?
Most hot tubs need a full water change every 3 to 4 months. To estimate your own schedule, divide your tub's gallons by 3, then divide by the average number of daily bathers. That gives you the approximate number of days between water changes.
Can I just top off my hot tub instead of draining it?
Topping off replaces water lost to evaporation, but it doesn't remove dissolved solids. Over time, TDS keeps rising until a full drain is the only fix.
How long does it take to drain and refill a hot tub?
Draining takes 1 to 2 hours with a garden hose, or much less with a submersible pump. Cleaning and refilling take another 1 to 2 hours. After that, the tub needs several hours to reheat.
Is it safe to drain a hot tub in winter in Colorado?
Yes, if you drain and refill on the same day, ideally when it's above 40°F, and never leave the tub empty overnight in freezing weather. In mountain areas, consider scheduling professional service.
Why does my hot tub foam after I refill it?
Foam after a refill usually means soap residue from household cleaners, laundry detergent left in swimsuits, or leftover biofilm in the plumbing. Flush the lines before draining and use a spa-specific surface cleaner.


